Categories

Contact Us

Zhejiang Jiayue Machinery Manufacturing Co.,Ltd
Add:No.7 Changxin Road, Yancang Subdisctrict, Dinghai, Zhoushan, Zhejiang, China
Tel:+86-0580-8808828
Fax:+86-0580-8808829
Mobile: +86-15958098091(Wechat, WhatsApp)

Contact Person: Jade Le

E-mail:Jiayuescrew@aliyun.com

Screw and Barrel for Shoe Soles Injection Molding Machine

Screw and Barrel for Shoe Soles Injection Molding Machine

Vented Type Screw and Barrel for Injection Molding Machine and Extruder Product Parameter Product Features Vented Type Screw and Barrel for Injection Molding Machine and Extruder Molding: 1, injection temperature Must be integrated product shape, size, mold structure. Generally used in the 270 °...

Chat Now

Product Details

China Screw And Barrel For Shoe Soles Injection Molding Machine

shoe soles injeciton molding machine.jpg

 

Product Parameter

Screw and Barrel for Shoe Soles Injection Molding Machine

Material

High Quality38CrMoALA+SKD

Mould Clamping Force

100KN-35000KN

Thickness of Hard Chrome Plating Layer

0.05-0.10mm

Hardness of Hard Chrome Plating  Layer:

≥900HB

Screw diameter

Φ25-φ300

Plastic materials can your screw barrel process

General Plastics, ABS, PA, PC, PE, PET,  PP, PS, EVA, PU, PVC, U-PVC, PA + GF(Glass Fiber),Flame-resistant Reinforced Plastics, Modified Engineering Plastics, RecycledMaterial, etc


Product Features

Screw and Barrel for Shoe Soles Injection Molding Machine  

3_副本.jpg


Screw And Barrel For Shoe Soles Injection Molding Machine factory

Note on the operation process of the sole injection molding machine:


Developing a good sole injection molding machine operating habits is good for improving machine life and production safety.


Before starting the machine: (1) Check if there is water or oil in the electrical control box. If the appliance is damp, do not turn it on. The electrical parts should be blown dry by the maintenance personnel before turning them on. (2) Check if the power supply voltage is consistent, generally should not exceed ±15%. (3) Check the emergency stop switch, whether the front and rear safety door switches are normal. Verify that the motor and oil pump are rotating in the same direction. (4) Check whether the cooling pipes are unblocked, and pass cooling water to the cooling water jacket at the oil cooler and the end of the barrel. (5) Check if there is any lubricating oil (fat) in each active part and add enough lubricant. (6) Turn on the electric heating and warm the various sections of the barrel. When the temperature of each section meets the requirements, it is kept for a while to make the machine temperature stable. The holding time varies according to the requirements of different equipment and plastic materials. (7) Add enough plastic to the hopper. According to the requirements of different plastics for injection molding, some raw materials are preferably dried first. (8) Cover the heat shield on the barrel to save energy and extend the life of the electric heating coil and the current contactor.


During the operation: (1) Do not cancel the function of the security door at will. (2) Pay attention to the temperature of the pressure oil. The oil temperature should not exceed the specified range. The ideal working temperature of hydraulic oil should be maintained between 45~50 °C, generally in the range of 35~60 °C. (3) Pay attention to adjust each travel limit switch to avoid the impact of the machine during the action.


At the end of the work: (1) Before stopping the machine, the plastic in the barrel should be cleaned to prevent oxidation of the remaining material or long-term thermal decomposition. (2) The mold should be opened to keep the toggle mechanism locked for a long time. (3) The workshop must be equipped with lifting equipment. Care should be taken when installing and removing bulky parts such as molds to ensure production safety.


Production Process

image004_副本.jpg


Application Area

Applications in Plastic Products

image006_副本.jpg


Screw And Barrel For Shoe Soles Injection Molding Machine Made in China


Our Advantages

◆ Customized Solutions

◆ Available in different machines and sizes

◆ Highly Polished and processed

◆ Good Performance

◆ Higher Corrosion Resistance

◆ Higher Wear resistance 

 

Package and Delivery

image010(001).jpg


FAQ

Q: Why you?

A:You can get a very fair price with high quality, that can make you very competitive in your market.

Q: How about you after sales service?

A: 24-hours Online Service by email or online-chat tools

Q: How to make sure the screw barrel suitable for our machines?

A: We will give you assembly drawing for final confirmation.     

Hot Tags: screw and barrel for shoe soles injection molding machine, China, suppliers, factory, customized, in stock, made in China
Related Products

Inquiry